sales@tipcotec.com
410-356-0003
Stucchi Flat Face Coupler, VEP Series, Connection Type 1: Fitting, Connection Size 1: 1-1/4 in, Connection Type 2: NPTF, Gender 2: Female, Connection Size 2: 1-1/4 in, Hex Size: 2.17 in, 6815 psi, Carbon Steel, Dimensions: 4.2 in L x 2.75 in W, -20 to 100 deg C
| Fitting Type | : | Coupler |
| Series | : | VEP |
| Connection 1 | : | 1-1/4 in Fitting |
| Connection Type 1 | : | Fitting |
| Connection Size 1 | : | 1-1/4 in |
| Connection 2 | : | 1-1/4 in NPT |
| Connection Type 2 | : | NPTF |
| Gender 2 | : | Female |
| Connection Size 2 | : | 1-1/4 in |
| Hex Size | : | 2.17 in |
| Pressure Rating | : | 6815 psi |
| Material | : | Carbon Steel |
| Dimensions | : | 4.2 in L x 2.75 in W |
| Temperature Rating | : | -20 to 100 deg C |
The "VEP-P" screw flat face coupling Series is the Stucchi solution for hydraulic applications requiring high operating pressures and connection with residual pressure trapped in the circuit. The screw connection system eliminates the premature wear or "brinnelling" typically associated with locking ball connection systems when used in high impulse circuits. The triple valve system allows connection of the coupling safely even in the presence of high internal residual pressure and at the same time eliminates fluid loss during the connection -disconnection process.
- Connection under residual pressure is allowed in one side and the internal valve system allows an easy connection
- Flat face is easy-to-clean, reducing the inclusion of contamination to the hydraulic circuit
- Minimal fluid loss during disconnection, reducing fluid loss to the environment
- Minimal air inclusion during connection/disconnection
- Internal pressure release valve system allows an easy connection with high internal residual pressure
- Patented internal valve design creates minimal pressure drop, maintaining circuit efficiency in the system
- The modular design allows flexibility with a wide range of configurations
- Good resistance at impulse pressures
- Compact slim design
- Safe and simple to use
- Interchanges with VEPHD, VEPHDL Series
- Connect/disconnect up to 25 MPa/3625 psi residual pressure
- Eliminates brinelling, reduces leakage
- Saves time changing tool
- All construction equipment applications with higher pressure requirements or connection/disconnection issues with tool attachments under residual pressure
Applications: For all large equipment needing junction points in circuit cranes, drilling machines, oil field, well head drives, porta-power and excavators with auxiliary line for attachments thumbs, grapples, hammers and compactors/hopaks
Catalog/Catalog Cut Sheet
