sales@tipcotec.com
410-356-0003
Stucchi Flat Face Coupler, APM Series, Connection Type 1: Fitting, Connection Size 1: 1/2 in, Connection Type 2: NPT, Gender 2: Male, Connection Size 2: 1/2 in, Hex Size: 1.42 in, 4785 psi, Carbon Steel, Finish: Zinc-Plated, Black, Dimensions: 3.58 in L x 1.52 in W, -20 to 100 deg C
| Fitting Type | : | Coupler |
| Series | : | APM |
| Connection 1 | : | 1/2 in Fitting |
| Connection Type 1 | : | Fitting |
| Connection Size 1 | : | 1/2 in |
| Connection 2 | : | 1/2 in NPT |
| Connection Type 2 | : | NPT |
| Gender 2 | : | Male |
| Connection Size 2 | : | 1/2 in |
| Hex Size | : | 1.42 in |
| Pressure Rating | : | 4785 psi |
| Material | : | Carbon Steel |
| Finish | : | Zinc-Plated |
| Color | : | Black |
| Dimensions | : | 3.58 in L x 1.52 in W |
| Temperature Rating | : | -20 to 100 deg C |
The "APM" male flat face coupling Series is the Stucchi solution for the manual connection with residual pressure in the circuit. The couplings have a triple valve system double internal pressure release valve and the flat face valve. This system easily allows the connection of couplings with the presence of high internal residual pressure without fluid loss. Based on this main feature, "APM" couplings are the ideal solution to hydraulic applications where there is the requirement to connect the circuit with internal residual pressure.
- Connection under residual pressure is allowed in one side and the internal valve system allows an easy connection
- Flat face is easy-to-clean, reducing the inclusion of contamination to the hydraulic circuit
- Minimal fluid loss during disconnection, reducing fluid loss to the environment
- Minimal air inclusion during connection/disconnection
- Internal pressure release valve system allows an easy connection with high internal residual pressure
- Patented internal valve design creates minimal pressure drop, maintaining circuit efficiency in the system
- The modular design allows flexibility with a wide range of configurations
- Good resistance at impulse pressures
- Compact slim design
- Safe and simple to use
- Interchanges with ISO 16028
- Relieves pressure within itself only
- Connect up to 30 MPa/4350 psi residual pressure
- Connect under high-pressure, by hand
Applications: For mobile equipment and attachment tools, where sun exposure/temperature change causes pressure due to thermal expansion of trapped fluid, mobile equipment and attachment tools, where sun exposure/temperature change causes pressure due to thermal expansion of trapped fluid any application where static pressure can get locked into the system, industrial, agricultural, oil and gas applications
Catalog/Catalog Cut Sheet
