Dixon® 48F-4-8
Send Print
  1. pin-int

Dixon® 48F-4-8

Dixon® 48F-4-8 Brass Connector, 1/4 in Male SAE 45 deg Flare x 1/2 in Male Threaded

  • Manufacturers: Dixon
  • Brand Name: Dixon®
  • Tipco Part No: DXN 48F-4-8
  • MPN: 48F-4-8
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Register to see Availability

Dixon® Connector, Connection Type 1: SAE 45 deg Flare, Gender 1: Male, Connection Size 1: 1/4 in, Thread Size 1: 7/16-20, Connection Type 2: Threaded, Gender 2: Male, Connection Size 2: 1/2 in, Hex Size: 7/8 in, 1400 psi, Brass, For Use With: Copper, Brass, Aluminum and Welded Steel Hydraulic Tubing, Dimension Standards: SAE J512, J513, SAE 010102, -65 to 250 deg F

California residents see Prop 65 WARNINGS

Fitting Type      :      Connector
Connection 1      :      1/4 in Flare
Connection Type 1      :      SAE 45 deg Flare
Gender 1      :      Male
Connection Size 1      :      1/4 in
Thread Size 1      :      7/16-20
Connection 2      :      1/2 in Threaded
Connection Type 2      :      Threaded
Gender 2      :      Male
Connection Size 2      :      1/2 in
Hex Size      :      7/8 in
Pressure Rating      :      1400 psi
Material      :      Brass
For Use With      :      Copper, Brass, Aluminum and Welded Steel Hydraulic Tubing
Dimension Standards      :      SAE J512, J513, SAE 010102
Temperature Rating      :      -65 to 250 deg F
  • Economical fitting resists mechanical pullout
  • Easy to disassemble and may be reassembled repeatedly, for a leak-proof connection
  • Manufactured from CA 360, CA 345 or CA377 brass

Applications: Manufactured especially for hard-to-hold liquids and gases

Instructions:

  • Cut tubing squarely and clean tube end thoroughly to remove burrs.
  • Place nut onto tube.
  • Place threaded end of nut toward end of tube.
  • Flare tube end with flaring tool to provide 45 deg flare.
  • Clamp tube flare between nut and nose of fitting body by screwing nut on finger tight.
  • Tighten with a wrench an additional 1/4 turn for metal to metal seal.

Safety Notes:

  • The psi rating given is based on a temperature of 73 deg F using copper tubing.
  • Temperature and type of tubing used are important factors in working pressure ranges.