Dixon® 144F-4
Send Print
  1. pin-int

Dixon® 144F-4

Dixon® 144F-4 Brass Union Tee, 1/4 in SAE 45 deg Flare

  • Manufacturers: Dixon
  • Brand Name: Dixon®
  • Tipco Part No: DXN 144F-4
  • MPN: 144F-4
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Register to see Availability

Dixon® Union Tee, Connection Type 1: SAE 45 deg Flare, Connection Size 1: 1/4 in, Thread Size 1: 7/16-20, Connection Type 2: SAE 45 deg Flare, Connection Size 2: 1/4 in, Thread Size 2: 7/16-20, Connection Type 3: SAE 45 deg Flare, Connection Size 3: 1/4 in, Thread Size 3: 7/16-20, 1400 psi, Brass, For Use With: Copper, Brass, Aluminum and Welded Steel Hydraulic Tubing, Dimension Standards: SAE J512 and J513, SAE 010401, -65 to 250 deg F

California residents see Prop 65 WARNINGS

Fitting Type      :      Union Tee
Connection 1      :      1/4 in Flare
Connection Type 1      :      SAE 45 deg Flare
Connection Size 1      :      1/4 in
Thread Size 1      :      7/16-20
Connection 2      :      1/4 in Flare
Connection Type 2      :      SAE 45 deg Flare
Connection Size 2      :      1/4 in
Thread Size 2      :      7/16-20
Connection 3      :      1/4 in Flare
Connection Type 3      :      SAE 45 deg Flare
Connection Size 3      :      1/4 in
Thread Size 3      :      7/16-20
Pressure Rating      :      1400 psi
Material      :      Brass
For Use With      :      Copper, Brass, Aluminum and Welded Steel Hydraulic Tubing
Dimension Standards      :      SAE J512 and J513, SAE 010401
Temperature Rating      :      -65 to 250 deg F
  • Economical fitting resists mechanical pullout
  • Easy to disassemble and may be reassembled repeatedly, for a leak-proof connection
  • Manufactured from CA 360, CA 345 or CA377 brass
  • Manufactured especially for hard-to-hold liquids and gases
  • Use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared

Instructions:

  • Cut tubing squarely and clean tube end thoroughly to remove burrs.
  • Place nut onto tube.
  • Place threaded end of nut toward end of tube.
  • Flare tube end with flaring tool to provide 45 deg flare.
  • Clamp tube flare between nut and nose of fitting body by screwing nut on finger tight.
  • Tighten with a wrench an additional 1/4 turn for metal to metal seal.

Safety Notes:

  • The psi rating given is based on a temperature of 73 deg F using copper tubing.
  • Temperature and type of tubing used are important factors in working pressure ranges.