sales@tipcotec.com
410-356-0003
Dixon® Block and Bleed Needle Valve, Nominal Size: 1/2 in, Connection Type: MPT x FPT, Actuator Type: T-Handle, 316 Stainless Steel, 316 Stainless Steel Trim, FKM Seal, Flow Coefficient: 0.44 Cv, 10000 psi
California residents see Prop 65 WARNINGS
| Product Type | : | Needle Valve |
| Nominal Size | : | 1/2 in |
| Connection Type | : | MPT x FPT |
| Actuator Type | : | T-Handle |
| Material | : | 316 Stainless Steel |
| Trim Material | : | 316 Stainless Steel |
| Seal Material | : | FKM |
| Flow Coefficient | : | 0.44 Cv |
| Pressure Rating | : | 10000 psi |
- Allows pressure to be bled off without disturbing the permanent piping installation allowing quick and easy removal or replacement of instruments
- FKM O-ring and PTFE back-up ring below the threads protects from corrosion and galling
- Stem threads are rolled for strength and ease of operation
- 0.09 in bleed hole located on the bottom is controlled by a 1/4-20 UNF 2A bleed screw
- Metal-to-metal hard seat design is 100% helium leak tested to 1 x 10-4 ml/s at 200 psi
Specification Sheet
