sales@tipcotec.com
410-356-0003
Dixon® In-Line Oil Lubricator, Inlet Size: 3/4 in, Outlet Size: 3/4 in, Inlet Connection Type: NPT, Outlet Connection Type: NPT, Flow Rating: 70 scfm, 200 psi, Lubricant Capacity: 11 fl-oz, Aluminum, Dimensions: 6-1/16 in L x 2-13/16 in W x 3 in H
California residents see Prop 65 WARNINGS
| Product Type | : | Oil Lubricator |
| Inlet Size | : | 3/4 in |
| Outlet Size | : | 3/4 in |
| Inlet Connection Type | : | NPT |
| Outlet Connection Type | : | NPT |
| Flow Rating | : | 70 scfm |
| Pressure Rating | : | 200 psi |
| Lubricant Capacity | : | 11 fl-oz |
| Material | : | Aluminum |
| Dimensions | : | 6-1/16 in L x 2-13/16 in W x 3 in H |
- Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms
- Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor
- Use any petroleum-based, non-detergent lightweight oil (SAE 10/150SSU) which will readily break up into a mist, i.e., Mobil DTE light or comparable oil
- Transparent sight disc allows visual inspection of oil level
- Oil flow regulated by screwdriver screw adjustment
- Minimum flow rate is 30 scfm
Instructions:
- Installation is recommended within 25 ft of the tool to be lubricated.
- Refer to the arrow for proper air flow direction.
Safety Notes:
- Not recommended for constant flow applications.
- For reciprocating tools only.
- Do not use any synthetic oil or oils containing additives or solvents.
Catalog/Catalog Cut Sheet
