sales@tipcotec.com
410-356-0003
Dixon® Non-Safety Blow Gun, Inlet Size: 1/4 in, Connection Type: FPT, 30 psi, Conical Tip, Tip Material: Rubber, Die-Cast Zinc, Vinyl Thumb Lever Grip, Finish: Chrome-Plated
California residents see Prop 65 WARNINGS
| Product Type | : | Blow Gun |
| Inlet Size | : | 1/4 in |
| Connection Type | : | FPT |
| Pressure Rating | : | 30 psi |
| Tip Type | : | Conical |
| Tip Material | : | Rubber |
| Material | : | Die-Cast Zinc |
| Grip Type | : | Vinyl Thumb Lever |
| Finish | : | Chrome-Plated |
- The conical, rubber tip can also be used to create a seal between the blow gun and fluid lines
- The rubber tip will not scratch or mar delicate surfaces
- Blow gun body is designed to comfortably fit the contour of the hand, minimizing user fatigue
- Large lever with vinyl grip further adds to the ergonomic design and allows for easy air flow activation
- Chrome-plated zinc die-cast body, nickel-plated steel lever, vinyl thumb grip, stainless steel spring, brass valve, Buna-N seals and rubber tip with a nickel-plated brass base provide superior corrosion resistance
- Base of the tip is nickel-plated brass for additional corrosion resistance
Applications: For cleaning purposes only if the air supply has been reduced to 30 psi or less
Safety Notes:
- Safety glasses or shield must be worn when using any blow gun.
- Must be used on air lines having a maximum regulated pressure of 30 psi in order to comply with OSHA Standard 1910.242 (B).
- Non-Safety blow guns do not have a safety by-pass to prevent buildup of tip pressure in the event of tip blockage.
- They may be used for cleaning purposes only if the air supply (inlet pressure) has been reduced to 30 psi or less.
Catalog/Catalog Cut Sheet
