piwik image

Dixon® 270AT DXN 270AT | Tipco Technologies <!-- This is title -->
Dixon® 270AT
Send Print
  1. pin-int

Dixon® 270AT

Dixon® 270AT Push-On Fitting Insertion Tool, 13-1/2 in L x 2-3/8 in W x 7 in H

  • Manufacturers: Dixon
  • Brand Name: Dixon®
  • Tipco Part No: DXN 270AT
  • MPN: 270AT
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Register to see Availability

Dixon® Push-On Fitting Insertion Tool, 13-1/2 in Length, 2-3/8 in Width, 7 in Height

California residents see Prop 65 WARNINGS

Product Type      :      Insertion Tool
Length      :      13-1/2 in
Width      :      2-3/8 in
Height      :      7 in
  • Cuts push-on style hose and inserts the fitting
  • Built-in cutter slices through 1/4 - 3/4 ID reinforced push-on hose without fraying
  • Tool has four 7/16 in Dia mounting holes for bench mounting

Instructions:

  • To cut your hose, retract the handle, place the hose in the cutter area and pull the handle.
  • After cutting the hose to the desired length, place the hose under the cam handle locking it in place with the hose end aligned with the appropriate mark on the label.
  • Place the barbed end of the fitting against the end of the hose and then pull the handle forward to complete the installation.

Safety Notes:

  • Caution: push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
  • pdfSpecification Sheet https://16000tte.stage.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/Dixon_270AT_SS.pdf