piwik image

Continental 4L420 CTIV 4L420 | Tipco Technologies <!-- This is title -->
Continental 4L420
Send Print
  1. pin-int

Continental 4L420

Continental CONTI®FHP 4L420 Polybutadiene Cogged FHP V-Belt, 42 in, 4L Section, 1/2 in W, 5/16 in Thick

  • Manufacturers: Continental Industries
  • Brand Name: Continental
  • Tipco Part No: CTIV 4L420
  • MPN: 4L420
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Register to see Availability

Continental CONTI®FHP Cogged FHP V-Belt, V-Belt Section: 4L, Outer Circumference: 42 in, 1-Rib, Construction: Cut-Edge, Molded Cogged, 1/2 in Width, 5/16 in Thickness, Polybutadiene, -40 to 140 deg C, For Use With: Multiple Belt System

Product Type      :      FHP V-Belt
V-Belt Section      :      4L
Outer Circumference      :      42 in
Number of Ribs      :      1
Construction      :      Cut-Edge, Molded Cogged
Width      :      1/2 in
Thickness      :      5/16 in
Material      :      Polybutadiene
Temperature Rating      :      -40 to 140 deg C
For Use With      :      Multiple Belt System

Our CONTI®FHP V-belts run smoother, quieter, last longer and substantially improve energy efficiency compared to non-cogged belts. You no longer have to accept the lower energy efficiency associated with envelope belts on fractional horsepower light-duty drives. Advanced V-belt technology has resulted in the development of a cut edge, molded cog construction which exceeds conventional envelope belts in every performance category except oil-resistance confirmed in extensive testing. The cogged design of our CONTI®FHP V-belts (standard on 4L and 5L sizes) provides a greater surface area for heat dissipation and allows increased air flow around the belt during operation. These factors help to reduce internal belt temperatures and greatly improve belt life. Of course, the cogged design also improves flexibility, an especially important consideration where minimum or substandard sheave diameters are involved. Low cross section vibration in rubber edged, cogged belts reduces noise generation. This allows you to take advantage of the longer life and high-efficiency of CONTI®FHP V-belts in noise sensitive equipment. But even in typical factory settings, our CONTI®FHP V-belts contribute to a quieter operating environment.

  • Cogged for cooler running
  • Low vibration for low noise
  • Superior efficiency for improved performance
  • Dust-proof
  • Rubber cushion and insulation
  • Heat, ozone and abrasion-resistant
  • Suitable for tropical climates