sales@tipcotec.com
410-356-0003
X-FLEX Premium Hydraulic Spiral Hose, EC600 Series, Nominal Size: 1 in, Dash Size: 16, 1.55 in OD, 1 in ID, 0.52 in Thick Wall, 1 ft Length, 6100 psi, SAE Rating: SAE 100R15 / EN856 R15, Synthetic Rubber, WeatherSHIELD™ Synthetic Rubber Cover, Construction: 4-Spiral Wire, Black, 6-1/2 in Bend Radius, Resistance Properties: Abrasion, -40 deg F Low, 250 deg F High
| Product Type | : | Hydraulic Spiral Hose |
| Series | : | EC600 |
| Nominal Size | : | 1 in |
| Dash Size | : | 16 |
| Outside Diameter | : | 1.55 in |
| Inside Diameter | : | 1 in |
| Wall Thickness | : | 0.52 in |
| Length | : | 1 ft |
| Pressure Rating | : | 6100 psi |
| SAE Rating | : | SAE 100R15 / EN856 R15 |
| Material | : | Synthetic Rubber |
| Cover Material | : | WeatherSHIELD™ Synthetic Rubber |
| Construction | : | 4-Spiral Wire |
| Color | : | Black |
| Bend Radius | : | 6-1/2 in |
| Resistance Properties | : | Abrasion |
| Temperature Low | : | -40 deg F |
| Temperature High | : | 250 deg F |
Eaton's EC600 is a more flexible SAE 100R15 spiral hose to complement the current offering of Eaton's FC500 X-Flecx™ SAE 100R13 spiral hose offering. FC500 and EC600 were designed to perform in very demanding high impulse applications at 50% of the SAE 100R13 and SAE 100R15 bend radii, respectively. In order to install a spiral hose in a much smaller area, Eaton designed our X-Flex spiral hoses to be up to 38% more flexible for easier handling during installation. EC600 hose meets and exceeds SAE 100R15 performance at 1/2 the bend radius of a standard SAE 100R15 hose. EC600 has been tested to over 1.3 million impulse cycles with an operating pressure of 6100 psi. EC600 high-pressure spiral hydraulic hose was designed to meet the most demanding applications where very high-pressure and the need for easy installation in tight spaces come together. EC600 X-Flex hydraulic hose exceeds SAE 100R15 performance and ISO 18752.
- 4/6-spiral wire reinforcement
- Highly abrasion-resistant Duratuff® cover
- Improved force-to-bend
- SAE J1176 - class 0 cool down leakage
- Hose materials meet global REACH requirements
- Exceeds 100R15 and ISO 18752 performance
- New generation inner tube with 5x longer life than typical SAE 100R15 hose
- Reduction in weight of spiral hose assembly and better hose flexibility
- Offers longer hose life in applications that see high abrasion
- 1/2 in bend radius can reduce the hose length requirement and extend hose life in certain applications
- Improved flexibility for easier installation in tight spaces
- No fluid leakage between hose and fitting when machine is shut down and system cools
- Longer hose assembly life means more uptime and reduced overall operating costs
Applications: Hydraulic system service with petroleum and water-based fluids and general industrial use
Catalog/Catalog Cut Sheet
