sales@tipcotec.com
410-356-0003
King Cable® Hose-to-Tool Service Cable, 1/2 - 1-1/4 in Hose Diameter, 1/8 in Cable Diameter, 200 psi, 20-1/4 in Length, 304 Stainless Steel
California residents see Prop 65 WARNINGS
| Product Type | : | Hose-to-Tool Service Cable |
| Hose Diameter | : | 1/2 - 1-1/4 in |
| Cable Diameter | : | 1/8 in |
| Pressure Rating | : | 200 psi |
| Length | : | 20-1/4 in |
| Material | : | 304 Stainless Steel |
- King cable is the low cost answer to eliminate injuries caused by broken air hose connections
- King safety cable reaches across the hose fittings to provide standby safety for hose, spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose
- Spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose
- Thoroughly tested with years of service
- A positive safeguard for air hose connections helps you meet today's safety standards
- Highly-resistant to rust and corrosion
Applications: When hose, couplings or clamps fail, or there is an accidental separation of the assembly, King safety cables minimize damage to equipment and injuries to operators
Safety Notes:
- King safety cable must be installed in the extended position (no slack).
- The Canada Occupational Safety and Health regulations Part XIII, 13:6b states: "Where an air hose is connected to a portable air powered tool used by an employee, a restraining device shall be attached to all hose connections, in order to prevent injury to an employee in the even of an accidental disconnection of a hose".
Specification Sheet
