sales@tipcotec.com
410-356-0003
Dixon® Air Brake Insert, Connection Type 1: Tube, Connection Size 1: 1/4 in, 150 psi, 302/304 Stainless Steel, Dimensions: 0.163 in OD x 0.53 in L, Dimension Standards: SAE J246, -40 to 200 deg F, For Use With: SAE J844 Type A and B Tubing
California residents see Prop 65 WARNINGS
| Fitting Type | : | Insert |
| Connection 1 | : | 1/4 in Tube |
| Connection Type 1 | : | Tube |
| Connection Size 1 | : | 1/4 in |
| Pressure Rating | : | 150 psi |
| Material | : | 302/304 Stainless Steel |
| Dimensions | : | 0.163 in OD x 0.53 in L |
| Dimension Standards | : | SAE J246 |
| Temperature Rating | : | -40 to 200 deg F |
| For Use With | : | SAE J844 Type A and B Tubing |
- Positive grip
- 302/304 stainless steel
- Utilize ribbed sleeve for compression and positive grip
Applications: Designed for use in air brake systems or cab controls
Instructions:
- Cut tubing squarely maximum of 15 deg angle allowable.
- Check that port or mating part is clean and free of debris.
- Insert tubing into fittings until it bottoms on seat.
- Tighten nut with wrench until one thread remains visible on the fittings body, (this will allow for a number of remakes) or, the nut should be screwed down finger tight, then wrench tightened according to the tube size used.
Catalog/Catalog Cut Sheet
