sales@tipcotec.com
410-356-0003
Dixon® Air Brake Nut, Connection Type 1: Tube, Connection Size 1: 5/8 in, Connection Type 2: NPT, Gender 2: Male, Connection Size 2: 13/16 in, Thread Size 2: 13/16-18, Hex Size: 15/16 in, 150 psi, Brass, Dimensions: 0.77 in L, Dimension Standards: SAE J246, SAE 100110, -40 to 200 deg F, For Use With: SAE J844 Type A and B Tubing
California residents see Prop 65 WARNINGS
| Fitting Type | : | Nut |
| Connection 1 | : | 5/8 in Tube |
| Connection Type 1 | : | Tube |
| Connection Size 1 | : | 5/8 in |
| Connection 2 | : | 13/16 in NPT |
| Connection Type 2 | : | NPT |
| Gender 2 | : | Male |
| Connection Size 2 | : | 13/16 in |
| Thread Size 2 | : | 13/16-18 |
| Hex Size | : | 15/16 in |
| Pressure Rating | : | 150 psi |
| Material | : | Brass |
| Dimensions | : | 0.77 in L |
| Dimension Standards | : | SAE J246, SAE 100110 |
| Temperature Rating | : | -40 to 200 deg F |
| For Use With | : | SAE J844 Type A and B Tubing |
- Positive grip
- Machined from CA260, CA345 or CA377 brass
- Utilize ribbed sleeve for compression and positive grip
Applications: Designed for use in air brake systems or cab controls
Instructions:
- Cut tubing squarely maximum of 15 deg angle allowable.
- Check that port or mating part is clean and free of debris.
- Insert tubing into fittings until it bottoms on seat.
- Tighten nut with wrench until one thread remains visible on the fittings body, (this will allow for a number of remakes) or, the nut should be screwed down finger tight, then wrench tightened according to the tube size used.
Catalog/Catalog Cut Sheet
