Parker® 61CA-6
Send Print
  1. pin-int

Parker® 61CA-6

Parker® 61CA-6 Brass Nut and Sleeve Assembly, 3/8 in NPTF

  • Manufacturers: Parker Hannifin
  • Brand Name: Parker®
  • Tipco Part No: PKR 61CA-6
  • MPN: 61CA-6
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Register to see Availability

Parker® Nut and Sleeve Assembly, Connection Type 1: NPTF, Connection Size 1: 3/8 in, 2800 psi, Brass, 250 deg F, For Use With: Polyethylene, Nylon, Polypropylene, PTFE, FEP, and PFA Tubings

Fitting Type      :      Nut and Sleeve Assembly
Connection 1      :      3/8 in NPT
Connection Type 1      :      NPTF
Connection Size 1      :      3/8 in
Pressure Rating      :      2800 psi
Material      :      Brass
Temperature Rating      :      250 deg F
For Use With      :      Polyethylene, Nylon, Polypropylene, PTFE, FEP, and PFA Tubings

Parker's compress-align fittings require no flaring, soldering or other preparation of tubing. The captive sleeve is always oriented for correct installation, visible for inspection before and after installation. Parker's economical Compress-Align fittings are pre-assembled with a captive sleeve which is always oriented correctly for faster assembly. The captive sleeve gives a visible inspection before and after installation and the design of the sleeve aligns to seal even out-of-round tubing. Compress-Align can be used in many areas where flare fittings are used due to the higher pressure rating, meaning no flaring, soldering or tube preparation resulting in faster installation. Compress-Align bodies are interchangeable with standard compression bodies so inventory is decreased.

  • Captive sleeve
  • Higher working pressures versus standard compression fitting
  • Bodies interchangeable with standard compression bodies
  • Economical
  • One wrench turn from finger tight for assembly for all sizes
  • UL listed for flammable liquids

Applications: For air lines, lubrication lines, fluid transfer, chemical dispensing, cooling lines and machine tools