sales@tipcotec.com
410-356-0003
Dixon® Sleeve, Connection Type 1: Compression, Connection Size 1: 3/8 in, Acetal, Dimensions: 0.19 in L, Dimension Standards: SAE J512
California residents see Prop 65 WARNINGS
| Fitting Type | : | Sleeve |
| Connection 1 | : | 3/8 in Compression |
| Connection Type 1 | : | Compression |
| Connection Size 1 | : | 3/8 in |
| Material | : | Acetal |
| Dimensions | : | 0.19 in L |
| Dimension Standards | : | SAE J512 |
- Acetal sleeves allow for standard compression fittings to be used with industrial-grades of thermoplastic tubing
Applications: Use with copper, aluminum and thermoplastic tubing. Manufactured for low and medium-pressure tubing connection work where excessive vibration or tube movement is not involved
Instructions:
- No flaring, soldering or other preparation of tubing necessary to assemble.
- Slide nut, then sleeve onto tubing.
- The thread end of the nut must face out.
- Insert tube into the fitting.
- Be sure the tube is bottomed on the fitting shoulder.
- Assemble nut to body, and tighten hand tight.
- Then follow the number of appropriate wrench turns for the given size.
Safety Notes:
- Not recommended for steel tubing.
- Not recommended for applications using gaseous media.
Catalog/Catalog Cut Sheet
