Dixon® DDA300AL
Send Print
  1. pin-int

Dixon® DDA300AL

Dixon® DDA300AL Aluminum Mann Tek Dry Disconnect Tank Unit Adapter, 119 mm Male Adapter x 3 in FNPT

  • Manufacturers: Dixon
  • Brand Name: Dixon®
  • Tipco Part No: DXN DDA300AL
  • MPN: DDA300AL
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Register to see Availability

Dixon® Mann Tek Dry Disconnect Tank Unit Adapter, Connection Type 1: Fitting, Gender 1: Male, Connection Size 1: 119 mm, Connection Type 2: NPT, Gender 2: Female, Connection Size 2: 3 in, 230 psi, Aluminum, Dimensions: 119 mm Dia x 144 mm L, For Use With: Composite (Polyeten PE-HD 300) Cap

California residents see Prop 65 WARNINGS

Fitting Type      :      Adapter
Connection 1      :      119 mm Fitting
Connection Type 1      :      Fitting
Gender 1      :      Male
Connection Size 1      :      119 mm
Connection 2      :      3 in NPT
Connection Type 2      :      NPT
Gender 2      :      Female
Connection Size 2      :      3 in
Pressure Rating      :      230 psi
Material      :      Aluminum
Dimensions      :      119 mm Dia x 144 mm L
For Use With      :      Composite (Polyeten PE-HD 300) Cap
  • Conical valve seat reduces the risk for piston blow-out
  • PTFE bearings between the piston shaft and the piston guide eliminate the risk of seizure
  • Easy to handle-push and turn-free flow, turn and pull-closed
  • Time saving - no need to drain hoses or pipe systems
  • Economical, no loss or spillage of liquids at connection or disconnection
  • Safety- the valve cannot be opened until the unit is coupled
  • Environmental friendly, accidental spillage eliminated when properly used
  • Safe and reliable- due to rugged construction
  • Selectivity- to avoid product contamination, selective versions of the couplers and adapters are available, contact Dixon for further information
  • Aluminum poppet
  • Stainless steel internals
  • Produced according to NATO standard STANAG 3756 and ATOFINA SGM 2049.TUY.C
  • FKM (FPM) seal
  • Compatible with Mann-Tek, Avery Hardoll and Todo-matic® and any other product produced according to NATO standard STANAG 3756

Applications: Dry disconnect couplings are designed for the quick and spill-free connection and disconnection of hoses and pipelines. They are used by producers of ink, adhesives, fatty acids, pharmaceuticals, liquid soaps, petroleum, chemicals, agricultural and a wide variety of common caustic and specialty acids

Instructions:

  • Adapter is usually installed on the tank or manifold.

Safety Notes:

  • Working pressure is based on psi at ambient temperature 70 deg F, for pressure ratings at other temperatures contact Dixon®.