sales@tipcotec.com
410-356-0003
Dixon® Heavy-Duty Internal Expansion Raised End Stem, Connection Type 1: Hose, Connection Size 1: 3 in, 600 psi, Carbon Steel, Dimensions: 4-3/16 in Dia x 8-3/4 in L, For Use With: Internal Expansion Ferrules
California residents see Prop 65 WARNINGS
| Fitting Type | : | Stem |
| Connection 1 | : | 3 in Hose |
| Connection Type 1 | : | Hose |
| Connection Size 1 | : | 3 in |
| Pressure Rating | : | 600 psi |
| Material | : | Carbon Steel |
| Dimensions | : | 4-3/16 in Dia x 8-3/4 in L |
| For Use With | : | Internal Expansion Ferrules |
- Internally expanded couplings are essential when maximum flow of media is important
- Reduces turbulence through hose
- Excellent sealing and retention characteristics
- Outperforms band clamps
- Easy and consistent installation
Applications: Recommended for concrete placement, grout and plaster, food, dairy, pharmaceutical as well as other applications where increased flow capacity is important
Safety Notes:
- Dixon® Holedall stems and ferrules are specifically designed to be used together as a coupling system.
- Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon® Holedall products.
- Do not use a wrench or vice on ferrule.
- Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure.
- Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations.
- Consult Dixon® for recommendations on usage.
- Strict adherence to ferrule OD range (internally expanded) for each hose end to be assembled is essential for satisfactory performance.
- Internally expanded holedall couplings are not to be used with plastic lined chemical hose.
- Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting.
- The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure.
- Media being transported through the hose should be compatible with the stem material.
- Compatibility of ferrule material with the environment in which it will be used is recommended.
- Consult the compatibility chart or the Dixon® factory for material compatibility.
- Maximum recommended working pressures, in psi, given at 70 deg F/21 deg C ambient temperature.
- For hoses which use ferrules IXF48-3 to IXF48-5 and IXF64-2 to IXF64-5, consult Dixon® for working pressures.
Catalog/Catalog Cut Sheet
