sales@tipcotec.com
410-356-0003
Dixon® King™ Combination Nipple, Connection Type 1: NPT, Gender 1: Male, Connection Size 1: 4 in, Connection Type 2: Hose Barb, Connection Size 2: 4 in, Carbon Steel, Finish: Unplated, 4-1/32 x 4-1/2 in Diameter, 7-3/16 in Length
California residents see Prop 65 WARNINGS
| Fitting Type | : | Nipple |
| Connection 1 | : | 4 in NPT |
| Connection Type 1 | : | NPT |
| Gender 1 | : | Male |
| Connection Size 1 | : | 4 in |
| Connection 2 | : | 4 in Hose Barb |
| Connection Type 2 | : | Hose Barb |
| Connection Size 2 | : | 4 in |
| Material | : | Carbon Steel |
| Finish | : | Unplated |
| Diameter | : | 4-1/32 x 4-1/2 in |
| Length | : | 7-3/16 in |
- NPT threaded end no knurl
Applications: For low-pressure discharge and suction service for compatible liquids
Safety Notes:
- King combination nipples are not recommended for steam.
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application.
- Consult Dixon® for recommendations.
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for 15 min without leaking or coupling movement.
- For additional information and detailed instruction on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.
- Not for compressible products such as air or nitrogen.
Catalog/Catalog Cut Sheet
