piwik image

Dixon® KM52 DXN KM52 | Tipco Technologies <!-- This is title -->
Dixon® KM52
Send Print
  1. pin-int

Dixon® KM52

Dixon® King™ KM52 Steel Hose Mender for 2 Clamps, 5/8 in Hose

  • Manufacturers: Dixon
  • Brand Name: Dixon®
  • Tipco Part No: DXN KM52
  • MPN: KM52
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Register to see Availability

Dixon® King™ Hose Mender for 2 Clamps, Connection Type 1: Hose, Connection Size 1: 5/8 in, Connection Type 2: Hose, Connection Size 2: 5/8 in, Steel, For Use With: 2 Clamps, Dimensions: 23/32 in Dia x 4-7/8 in L

California residents see Prop 65 WARNINGS

Fitting Type      :      Hose Mender
Connection 1      :      5/8 in Hose
Connection Type 1      :      Hose
Connection Size 1      :      5/8 in
Connection 2      :      5/8 in Hose
Connection Type 2      :      Hose
Connection Size 2      :      5/8 in
Material      :      Steel
For Use With      :      2 Clamps
Dimensions      :      23/32 in Dia x 4-7/8 in L

Safety Notes:

  • Menders are not for compressible products such as air, nitrogen or steam.
  • The working pressure may vary with the construction of the hose, the type of clamping system used and the application.
  • Consult Dixon® for recommendations.
  • In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for 15 min without leaking or coupling movement.
  • For additional information and detailed instructions on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.