piwik image

Dixon® R1375DS DXN R1375DS | Tipco Technologies <!-- This is title -->
Dixon® R1375DS
Send Print
  1. pin-int

Dixon® R1375DS

Dixon® Holedall™ 520-H Brass Scovill Style Ferrule, 1-3/8 in, 1-55/64 - 1-58/64 in OD

  • Manufacturers: Dixon
  • Brand Name: Dixon®
  • Tipco Part No: DXN R1375DS
  • MPN: R1375DS
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Register to see Availability

Dixon® Holedall™ Scovill Style Ferrule, 520-H Series, Nominal Size: 1-3/8 in, 1-55/64 - 1-58/64 in OD, 1-7/16 in Length, Brass, For Use With: Internally Expanded Permanent Brass Couplings

California residents see Prop 65 WARNINGS

Fitting Type      :      Ferrule
Series      :      520-H
Nominal Size      :      1-3/8 in
Outside Diameter      :      1-55/64 - 1-58/64 in
Length      :      1-7/16 in
Material      :      Brass
For Use With      :      Internally Expanded Permanent Brass Couplings
  • H520 fittings are design for internal expansion only

Applications: For discharge and suction service, transfer of fuel to airplanes, homes, ships and more

Safety Notes:

  • Do not interchange with other manufacturer's fittings.
  • Designed for internal expansion only.
  • Dixon® Holedall stems and ferrules are specifically designed to be used together as a coupling system.
  • Do not use a wrench or vice on ferrule.
  • Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure.
  • Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations.
  • Consult Dixon® for recommendations on usage.
  • Strict adherence to ferrule OD range (internally expanded) for each hose end to be assembled is essential for satisfactory performance.
  • Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting.
  • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure.
  • Media being transported through the hose should be compatible with the stem material.
  • Compatibility of ferrule material with the environment in which it will be used is recommended.
  • Consult the Compatibility Chart or the Dixon® factory for material compatibility.
  • For applications other than the ones list, please consult Dixon®.