sales@tipcotec.com
410-356-0003
Dixon® King™ Combination Nipple, Connection Type 1: Hose Barb, Connection Size 1: 2 in, Connection Type 2: Grooved, Connection Size 2: 2 in, Steel, Finish: Unplated, 2-3/8 x 2-1/32 in Diameter, 4-11/16 in Length, 70 deg F
California residents see Prop 65 WARNINGS
| Fitting Type | : | Nipple |
| Connection 1 | : | 2 in Hose Barb |
| Connection Type 1 | : | Hose Barb |
| Connection Size 1 | : | 2 in |
| Connection 2 | : | 2 in Grooved |
| Connection Type 2 | : | Grooved |
| Connection Size 2 | : | 2 in |
| Material | : | Steel |
| Finish | : | Unplated |
| Diameter | : | 2-3/8 x 2-1/32 in |
| Length | : | 4-11/16 in |
| Temperature Rating | : | 70 deg F |
Applications: For low-pressure discharge and suction service for compatible liquids, crimp sleeves
Safety Notes:
- King combination nipples are not recommended for steam.
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application.
- Consult Dixon® for recommendations.
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for 15 min without leaking or coupling movement.
- For additional information and detailed instruction on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.
- Not for compressible products such as air or nitrogen.
Catalog/Catalog Cut Sheet
