piwik image

Dixon® 2VEPF2 DXN 2VEPF2 | Tipco Technologies <!-- This is title -->
Dixon® 2VEPF2
Send Print
  1. pin-int

Dixon® 2VEPF2

Dixon® VEP Zinc/Nickel-Plated Steel Coupler, 1/4 in Quick Disconnect x 1/4 in FNPTF

  • Manufacturers: Dixon
  • Brand Name: Dixon®
  • Tipco Part No: DXN 2VEPF2
  • MPN: 2VEPF2
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Register to see Availability

Dixon® Coupler, VEP Series, Connection Type 1: Quick Disconnect, Connection Size 1: 1/4 in, Connection Type 2: NPTF, Gender 2: Female, Connection Size 2: 1/4 in, Thread Size 2: 1/4-18, Hex Size: 22 mm, 6000 psi, Steel, Finish: Zinc/Nickel-Plated, Dimensions: 1.49 in OD x 2.14 in L, -40 to 250 deg F

California residents see Prop 65 WARNINGS

Fitting Type      :      Coupler
Series      :      VEP
Connection 1      :      1/4 in Quick Disconnect
Connection Type 1      :      Quick Disconnect
Connection Size 1      :      1/4 in
Connection 2      :      1/4 in NPT
Connection Type 2      :      NPTF
Gender 2      :      Female
Connection Size 2      :      1/4 in
Thread Size 2      :      1/4-18
Hex Size      :      22 mm
Pressure Rating      :      6000 psi
Material      :      Steel
Finish      :      Zinc/Nickel-Plated
Dimensions      :      1.49 in OD x 2.14 in L
Temperature Rating      :      -40 to 250 deg F
  • Two-stage valving to protect critical sealing components during pressurized connection and disconnection
  • Posi-Lock valve system secures valving during surge-flow conditions to prevent high velocity damage
  • No-spill, flush face valve minimizes air inclusion during connection and spillage during disconnection
  • Threaded design eliminates premature wear or brinelling commonly found with locking ball designs when subjected to high-impulse pressures
  • Machined components are manufactured using solid steel bar stock
  • Stainless steel retaining rings and springs maximize corrosion resistance and extend service life
  • Steel componentry is plated using RoHS compliant zinc nickel for superior corrosion resistance
  • Valve stems have molded polyurethane seals, with a temperature range of -65 to 212 deg F
  • Ancillary coupler seals are nitrile (Buna-N), with a temperature range of -40 to 250 deg F
  • TPC-ET anti-extrusion ring protects main coupling valve seal from dynamic impulse pressure damage
  • Interchangeable with Stucchi VEP-P/VEP-HD Series, DNP PST4/FSI Series, Voswinkel FT Series, Parker FET Series and Holmbury HFT Series
  • video www.youtube.com/embed/LtVEkkJFmbI