Dixon® Coupler, VEP Series, Connection Type 1: Quick Disconnect, Connection Size 1: 1 in, Connection Type 2: NPTF, Gender 2: Female, Connection Size 2: 1 in, Thread Size 2: 1-11-1/2, Hex Size: 44 mm, 5500 psi, Steel, Finish: Zinc/Nickel-Plated, Dimensions: 3.89 in L, -40 to 250 deg F
California residents see Prop 65 WARNINGS
Fitting Type |
: |
Coupler |
Series |
: |
VEP |
Connection 1 |
: |
1 in Quick Disconnect |
Connection Type 1 |
: |
Quick Disconnect |
Connection Size 1 |
: |
1 in |
Connection 2 |
: |
1 in NPT |
Connection Type 2 |
: |
NPTF |
Gender 2 |
: |
Female |
Connection Size 2 |
: |
1 in |
Thread Size 2 |
: |
1-11-1/2 |
Hex Size |
: |
44 mm |
Pressure Rating |
: |
5500 psi |
Material |
: |
Steel |
Finish |
: |
Zinc/Nickel-Plated |
Dimensions |
: |
3.89 in L |
Temperature Rating |
: |
-40 to 250 deg F |
- Two-stage valving to protect critical sealing components during pressurized connection and disconnection
- Posi-Lock valve system secures valving during surge-flow conditions to prevent high velocity damage
- No-spill, flush face valve minimizes air inclusion during connection and spillage during disconnection
- Threaded design eliminates premature wear or brinelling commonly found with locking ball designs when subjected to high-impulse pressures
- Machined components are manufactured using solid steel bar stock
- Stainless steel retaining rings and springs maximize corrosion resistance and extend service life
- Steel componentry is plated using RoHS compliant zinc nickel for superior corrosion resistance
- Valve stems have molded polyurethane seals, with a temperature range of -65 to 212 deg F
- Ancillary coupler seals are nitrile (Buna-N), with a temperature range of -40 to 250 deg F
- TPC-ET anti-extrusion ring protects main coupling valve seal from dynamic impulse pressure damage
- Interchangeable with Stucchi VEP-P/VEP-HD Series, DNP PST4/FSI Series, Voswinkel FT Series, Parker FET Series and Holmbury HFT Series
-
https://youtu.be/LtVEkkJFmbI