piwik image

Dixon® H5221-A-BU DXN H5221-A-BU | Tipco Technologies <!-- This is title -->
Dixon® H5221-A-BU
Send Print
  1. pin-int

Dixon® H5221-A-BU

Dixon® 520-H Brass Permanently Attached Petroleum Coupling, 1-1/4 in FNPSH

  • Manufacturers: Dixon
  • Brand Name: Dixon®
  • Tipco Part No: DXN H5221-A-BU
  • MPN: H5221-A-BU
  • UPC: 697464408420
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Register to see Availability

Dixon® Permanently Attached Petroleum Coupling, 520-H Series, Connection Type 1: NPSH, Gender 1: Female, Connection Size 1: 1-1/4 in, Connection Type 2: NPSH, Gender 2: Female, Connection Size 2: 1-1/4 in, Brass, For Use With: Internally Expanding Permanent Coupling-Scovill Style, Dimensions: 2-9/16 in L

California residents see Prop 65 WARNINGS

Fitting Type      :      Coupling
Series      :      520-H
Connection 1      :      1-1/4 in NPSH
Connection Type 1      :      NPSH
Gender 1      :      Female
Connection Size 1      :      1-1/4 in
Connection 2      :      1-1/4 in NPSH
Connection Type 2      :      NPSH
Gender 2      :      Female
Connection Size 2      :      1-1/4 in
Material      :      Brass
For Use With      :      Internally Expanding Permanent Coupling-Scovill Style
Dimensions      :      2-9/16 in L
  • Female has octagonal facets for tightening with a wrench
  • The stem is expanded to nominal ID of hose for a rigid, uniform, full-flow area
  • Couplings are compact, light and streamlined to eliminate catching on curbs and shrubs
  • Couplings are pre-lubricated for assembly
  • Stems are machined from bar stock or solid brass forgings

Applications: For discharge and suction service and commonly used in the transfer of fuel to homes, airplanes, ships, internal expansion only

Safety Notes:

  • Do not interchange with other manufacturer's fittings.
  • Designed for internal expansion only.
  • Dixon® Holedall stems and ferrules are specifically designed to be used together as a coupling system.
  • Do not use a wrench or vice on ferrule.
  • Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure.
  • Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations.
  • Consult Dixon® for recommendations on usage.
  • Strict adherence to ferrule OD range (internally expanded) for each hose end to be assembled is essential for satisfactory performance.
  • Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting.
  • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure.
  • Media being transported through the hose should be compatible with the stem material.
  • Compatibility of ferrule material with the environment in which it will be used is recommended.
  • Consult the Compatibility Chart or the Dixon® factory for material compatibility.
  • For applications other than the ones list, please consult Dixon®.