sales@tipcotec.com
410-356-0003
Dixon® Union Tee, Connection Type 1: Compression, Connection Size 1: 3/4 in, Connection Type 2: Compression, Connection Size 2: 3/4 in, Connection Type 3: Compression, Connection Size 3: 3/4 in, 100 psi, Brass, Dimension Standards: SAE J512, SAE 060401 BA, -65 to 250 deg F
California residents see Prop 65 WARNINGS
| Fitting Type | : | Union Tee |
| Connection 1 | : | 3/4 in Compression |
| Connection Type 1 | : | Compression |
| Connection Size 1 | : | 3/4 in |
| Connection 2 | : | 3/4 in Compression |
| Connection Type 2 | : | Compression |
| Connection Size 2 | : | 3/4 in |
| Connection 3 | : | 3/4 in Compression |
| Connection Type 3 | : | Compression |
| Connection Size 3 | : | 3/4 in |
| Pressure Rating | : | 100 psi |
| Material | : | Brass |
| Dimension Standards | : | SAE J512, SAE 060401 BA |
| Temperature Rating | : | -65 to 250 deg F |
Applications: Use with copper, aluminum and thermoplastic tubing. Manufactured for low and medium-pressure tubing connection work where excessive vibration or tube movement is not involved
Instructions:
- No flaring, soldering or other preparation of tubing necessary to assemble.
- Slide nut, then sleeve onto tubing.
- The thread end of the nut must face out.
- Insert tube into the fitting.
- Be sure the tube is bottomed on the fitting shoulder.
- Assemble nut to body, and tighten hand tight.
- Then follow the number of appropriate wrench turns for the given size.
Safety Notes:
- Not recommended for steel tubing.
- Not recommended for applications using gaseous media.
Catalog/Catalog Cut Sheet
